I wanted to see if I could use up as much of the Ariana paper and chipboard pieces and it's assortment of bows as I could. So I started with the WOTG. Then the additional WOTG layouts. Next I took two ideas that are in the current CTMH Idea Book and made them into a two page layout. Which brings me to this two page layout.
I was getting low on the papers and supplies but there were enough still that I thought I could make one more layout. I didn't have quite enough Ariana paper left so I got out an older pack called Dakota. I felt the wood grain paper coordinated well with Ariana. There is a current paper pack called Timberline that has a wood type paper but I don't own that one so I used one from my stash. In addition in putting these two pages together I even used the Zip strips off the top of the B&T papers. It felt good to use up so much of the Ariana supplies and end up with a number of layouts as a result.
This is the left page. Because I ran out of my Ariana bows for this layout I used my Bow Easy Tool and made my own bows. I used ribbon from my stash again. I had the Sorbet ribbon rounds and a ribbon from believe it or not a Christmas kit called Mistletoe. I used quite a few of the Dimensional Elements and Epoxy Bubbles to finish it off.
On the right page below I finished much like the left page with a small difference. With the Dimensional Element Camera I added a little Crystal Glass on the lens. I made another bow using a ribbon from the Sorbet ribbon round and the Bow Easy Tool.
It was fun to take a pattern from one of the How To books and then go to work putting this layout together.
Thanks for stopping by.
I am excited to make this layout using my remaining Ariana and some from my stash. Thank you for sharing.
ReplyDelete